Speed  up  your  pc
_____________________________________________________________________________________________________________________________________________________
   10 Easy Steps to Speed Up Your Computer Without Upgrading

                                                                                                                                                 By Jim Shutes
                                                                                                                                                 LapeerTechGroup.com

It seems that the longer you own your computer, the slower it gets! A lot of people will keep their computer until it gets so slow that they feel they need a
newer, faster model. Some feel like the reason it is getting slower is because it is getting older, when that is just not the case. Your computer should run
just as fast as the day you brought it home – if you follow these 10 Easy Steps to Speed Up Your Computer.

1. Empty the Temp directory regularly.

Every time you launch a program, it creates a temporary file, until you either save or close the file. The reason it does this is in case your system crashes or
gets turned off (before saving the file), it will be possible to recover the unsaved file you were working on. This is a good idea, but rarely works. Every time
your system crashes, locks up, or gets turned off while you have open files, these temp files get created and just sit there in the Temp directory. Then, every
time you launch a program, it looks through all of the temp files (to see if one needs to be recovered) and slows the open process, and in some rare
cases, even locks up when trying to launch. In any event, the launch process is slowed.

Other ways of getting unneeded temp files is by installing programs. Most programs that get installed extract temp files (needed during the installation) to
the temp directory, but a lot of times don’t get deleted when the installation is complete.

Windows also uses the temp directory for its temp files, for recovery purposes and ongoing use.

After a short while, the temp directory fills up with hundreds (and I have even seen thousands) of temp files that always get scanned over when Windows
starts up and when programs launch. This slows everything down immensely.

Rule of thumb for Temp Files: If you don’t have any programs open (and nothing minimized in the bar below), then you shouldn’t have ANY temp files in
your temp directory. If you do, delete them.

To delete Temp files, make sure NO programs are open, and…

                                                                           a. In Windows 95, 98 or Me, go to C:WindowsTemp and delete everything inside the Temp folder.

                                                                           
b. In Windows 2000 or XP, it is a little trickier. First, make sure that you can see hidden folders. Double-click My
Computer. Click on the Tools pull-down menu, and then on Folder Options. Click on the View tab. Scroll down and click on Show Hidden Files and Folders.
Click Ok. Now you can go to the C:Documents and SettingsAdministratorLocal SettingsTemp folder. Delete everything here. Also, look in the C:Windows(or
Winnt)Temp or Tmp folders. Delete everything here, as well.

Note: this assumes that your logon ID is Administrator. If the main account is not Administrator, or if there are more than one account, substitute
“Administrator” for the account names, and delete the temp files from all of the C:Documents and Settings(account name)Local SettingsTemp folders.

2. Empty the Temporary Internet Files regularly.

This is similar to the Temp directory, but for images and cookies while browsing websites. Every time you go to a website, your browser will look through
your list of temporary Internet files, to see if you have all of the images needed to view your requested web page. If it is a very long list, it will delay your view
time. However, if you have a dial-up, this is the lesser of two evils. If you already have the needed images, it is quicker (for a dial-up) to look through your
temporary Internet files, than to download new images every time you visit a website.

On the other hand, if you have a broadband Internet connection (highspeed CableModem, DSL, Wireless, etc.), and you want a little more snap in your
surfing, then you should delete your Temporary Internet Files on a regular basis, and choose to Check for Newer Images on Every Visit to a web page.

To empty Temporary Internet Files, go to your Control Panel, by click on the StartSettingsControl Panel (or in Windows XP, just StartControl Panel) and
double-click the Internet Options icon. Choose to Delete Cookies, and to Delete Files. This will clear all of your Temporary Internet Files.

To have Internet Explorer always check for new images and content on every visit to a web page, to the right of the Delete Files button, is the Settings
button. Click this button and choose Every Visit to the Web Page. This option never has Internet Explorer look through your Temporary Internet Files to see if
you already have the images needed. This way, Internet Explorer will just automatically download every image, every time, without looking through a list. If
you have a good Internet connection, this is the better way to go. Don’t forget to delete your Temporary Internet Files every once in a while (see above).

3. Check your hard disks for problems.

There are two different types of disk checks: one is a file check, which checks the state of your operating system, checks all of your files, your file structure,
and other software checks. If there are software problems (such as a corrupt FAT (file allocation table), etc., this check will attempt to fix it. The other is a
physical hardware disk check. This checks the surface of your hard disks, to see if there are bad sectors (sections) of your hard drive, to see if your drive is
physically experiencing problems. This disk check will attempt to repair the bad sectors, but if it can’t, it will mark the sector as bad and attempt to move the
file(s) or file “pieces” to a good sector(s) of the disk. By marking the sector as bad, it knows not to write any future files to this section of the hard drive.

To run a disk check (or scan disk), here are the steps:

                                                                           a. For Windows 95, 98, or Me, double-click My Computer. Right-click the C-drive and click on Properties. Click on
the Tools tab and choose to check the computer for problems. If you choose to do a Thorough Scan, this will do the hardware check for physical disk
damage or sector damage. Otherwise, the Standard Scan does the software file check. In either case, you can choose to have the scan automatically fix
any errors it finds. The Thorough Scan does take quite a bit longer. You may want to let this run over night. Only do the Thorough Scan when you think there
may be a problem with your drive itself, or if you haven’t run it in a few months, otherwise, run the Standard Scan once a week or so.

                                                                          
 b. For Windows 2000 and XP, double-click My Computer. Right-click the C-drive and click Properties. Click on the
Tools tab and choose to check the computer for problems. Click on Check Now. You will then have two check boxes. The top option is for the file check, and
the second option is for the hardware (physical disk) check. Check either one, or both. At least check the top one. Again, if you think you may be having
problems with the hard disk itself, then check the second one, as well. And just like the Windows 98 Thorough Scan, this will take quite a bit longer to run,
so let it run over night. One thing, though: For Windows 2000 and XP, you won’t be able to run the check right then. After clicking the Start button (once the
check boxes are checked), you will need to reboot to run the disk check. It will ask you if you want the system to run the CHKDSK on reboot. Choose Yes
and reboot. Just before getting back into Windows, the system will do its CHKDSK, and depending on which options you chose, will take either a few
minutes, and sometimes up to an hour or so, to run. Let it run.

4. An even more thorough disk check (and tune-up), would be to use a 3rd party utility (a stand-alone program outside of Windows) to check
everything for you, automatically. One of my favorites is TuneUp Utilities 2004. It costs $39.99, but they do offer a FREE download trial of 15 days, to check it
out to see if it speeds up your computer and/or fixes any problems. This program does a really good job of not only checking your computer’s file structure,
master boot record, file allocation table, and files, but also an extremely good job of detecting and fixing bad sectors of your physical disk drives. And not
only that, it also tunes up your system for increased speed, checks and cleans your registry, adjusts memory for you, tweaks your Internet settings for faster
downloads and browsing (whether you use a dial-up or broadband), and streamlines your operating system for peak performance. I highly recommend
this program. If you don’t have it, you can download it HERE.

5. If you don’t want to get the TuneUp Utilities 2004, you can do a few of the performance tweaks yourself, if you have Windows XP. By default,
EVERYTHING is turned on in Windows XP. It isn’t very streamlined for performance, but rather for appearance. You can turn off a few of the unnecessary
features, and Windows will still work just fine, and maybe a little faster.

To do this, right-click on My Computer and click on Properties. Click on the Advanced tab. Under the Performance section, click on the Settings button. On
the Visual Effects tab, you will see a list of check boxes. By default, these are all on. You really don’t need any of them. If you choose one of the radio buttons
at the top, say, Adjust for Best Performance, then all of the check boxes will turn off. This will noticeably speed up your computer. You can go through the
check boxes one by one, and determine which ones you can and can’t live without. The one that will make the biggest effect is the very last one in the list.
This is the Themes. If you turn it off, it will free up a lot of system resources and give you quite a bit more memory to work with, but Windows XP will look
more like Windows 2000. For most people, this isn’t a problem. It is all eye-candy, anyway. Your pretty green pasture picture will disappear; your pretty
green and blue buttons and task bar will go to a gray. If you can live with these things, then you will have much more performance. You will find that menus
open up much more quickly and everything responds more immediately.

6. Turn off Active Desktop.

Active Desktop turns your desktop into a web page, and allows you to have things like a real-time calendar, and up-to-the-minute weather or stocks. These
things are really neat, but your system takes a performance hit when they are running in the background all the time. And even if you don’t use Active
Desktop for anything, just having it active can cause a performance decrease. Turn it off.

                                                                           
a. In Windows 95, 98 and Me, right-click on the desktop and in the pop-up menu, choose Active Desktop. Inside
that option, uncheck Active Desktop. If there is no check next to it, then it isn’t on. Don’t choose it. Instead, just click the desktop again to get out of the menu.

                                                                           
b. In Windows 2000, right-click on the desktop and in the pop-up menu, choose Active Desktop. Inside that
option, uncheck Show Web Content. Again, if there is no check next to it, then it is not on. Do not check it.

                                                                           
c. In Windows XP, right-click on the desktop and in the pop-up menu, choose Properties. On the Desktop tab,
choose Customize Desktop. Now, on the Web tab, make sure that there are no websites chosen here. If there aren’t any, then Active Desktop is not on.
Cancel and go back to the desktop.

7. Install and run a good AntiVirus program (regularly) to keep out viruses and Trojan horses that can take over your system. If you have a virus
(s), your system performance can be dramatically decreased. Viruses can do all kinds of nasty things to your computer. They can take over your computer,
erase your hard drive, use your computer as a server, give you a bunch of illegal music or programs and tell all of their friends to download it all from you –
leaving you holding the bag and supplying the computer space and bandwidth for their hobby. So, protect yourself with a good AntiVirus program. One of my
favorites is
AVG. It is not only a really good AntiVirus program, but it is also FREE! If you don’t have any AntiVirus software on your computer, get AVG
AntiVirus NOW by downloading HERE. If you already have an AntiVirus program, and you want to use AVG instead, do NOT install AVG. First, uninstall your
current AntiVirus program, reboot and install AVG. You do NOT want to have two AntiVirus programs installed at the same time. They will work against each
other and can cause problems.

8. Get rid of Spyware.

A lot of computer users have Spyware and don’t even know they have it, much less how to get rid of it. If your computer has been taking you to websites that
you don’t want to go to, or if you get pop-ups when you aren’t even on the Internet, or if your computer has been running extremely slowly lately, for no
reason, you probably have Spyware.

On all of the computers that I setup, I install two different AntiSpyware programs: AdAware SE and SpyBot. These two programs are highly recommended
by TechTV (G4) and other computer authorities (including my own research on Spyware) and work very well together. They compliment each other and
catch Spyware that the other misses, but together, do a very good job.

SpyBot is not only a good program for getting rid of Spyware, but also as a preventative Spyware-catcher. It sits there and looks for known Spyware coming
into your system, as well as suspicious-looking content. If you use the Tea-Timer feature, it can be a little annoying, but ANY suspicious-looking program,
trying to be installed on your system, is flagged and your permission is asked for it to be installed (now and always). If you don’t have this program installed
on your computer,
get it NOW by downloading HERE. Download all updates and run the Immunize option a couple of times (for preventative purposes).
Scan with it every day if you can.

AdAware SE has a little better Spyware database in it, but is not setup as a preventative AntiSpyware program. It does do a good job when you keep up on
the updates and manually scan your system with AdAware. If you don’t have this program on your computer,
get it NOW by downloading HERE. Download
all updates and run the Smart Scan daily (if not, at least weekly).

If, after downloading and installing, updating, and running both of these AntiSpyware program, you still can’t get rid of your Spyware, you may need to enlist
the services of a professional. Some Spyware is so intelligent that it looks to see if AntiSpyware programs delete the Spyware part of its programming and,
if it’s gone, reinserts it back in place. This can be very frustrating for the user (and in some cases, even for the professional). There are stronger measures
that can be taken to get rid of the Spyware, in cases like this, but can be very devastating to the user’s computer, if not handled perfectly. At this point, leave
it to the professional. Call a local computer repair company and have them come out to your home or business and get rid of the Spyware for you.

In some cases, when the Spyware has become too entwined into your system, even a computer repair technician can’t get rid of the Spyware. At this point,
it is better to just backup only what you need and have the operating system reinstalled. Believe me, when your computer gets to this point, you don’t want
to just put a “band-aid” on it. Just start from scratch with a clean system. It’s the best way to go.

9. Streamline MSCONFIG.

One thing that really causes a HUGE performance decrease is to have unnecessary programs running in the background. Some of these programs can be
seen in your System Tray (located next to the clock, in the lower-right corner of your screen). These are tiny programs that are robbing you of memory and
processing power. Some of them you need, while most you don’t. Some of the programs you DON’T need are printer icons, CD burning icons, shortcuts to
programs (such as video settings), AOL, any Instant Messaging Programs, etc. Just because these programs aren’t always running, doesn’t mean that
you still can’t print, burn CDs or Instant Message. They can be run when you need them, from a shortcut.
You can use a utility, called MSCONFIG, to turn OFF unnecessary Start Up items.

                                                                           
a. In Windows 98, Me, and XP, click on StartRun and type msconfig. Click on the Startup tab. This is a list of
everything that is running in the background, some of which show up in the System Tray. Now, be careful, some of these you do need. Some items to keep
are Ctfmon.exe (XP), Scan Registry (Win98, Me), Task Monitor (Win98, Me), System Tray (Win98, Me), LoadPowerProfile (Win98, Me), Rundll.32, any
AntiVirus programs (such as McAfee, Norton, or AVG). Others, you can uncheck, such as NeroCheck, ypager, qttask, AOL, and any other Instant Messaging
programs, or printing programs. Remember, if something doesn’t work, because you turned it off, it can always be turned back on. You just have to reboot
every time you make a change here. But, as you uncheck the unnecessary programs that run in the background, you will see that Windows loads much
faster, that there are less icons in the System Tray, and that your system is much more “snappy” and quick to respond.

                                                                          
 b. In Windows 2000, MSCONFIG wasn’t supplied. You actually have to download and run an MSCONFIG utility.
Here is a website that will let you download the MSCONFIG utility.
Click HERE to Download. And if you copy it into your C:Windows(or Winnt)System32
folder, you can access it the same way as Windows 98 or XP (by the Run command in the Start menu). Or, you can just double-click it and use it that way,
too. See above for what to leave checked and unchecked.

After you reboot, you will have a window that says that the configuration utility was edited. Just check not to show that in the future, a check box at the bottom.
This just means that there was a change made to the MSCONFIG.

10. Defragment your hard drives.

If you have never done this, or it has been a few months since the last time, this step is one of the most important things that will give you more
performance. As you use your computer, your drives become fragmented, by creating and deleting files. Just because a file is 10mb in size, doesn’t mean
that it is sitting there on the drive (all 10mb) all in one spot on the drive. It fills in from the inside of the drive, outward, as the drive finds room. So your one
file can be in pieces, in several spots on the hard drive. Don’t worry, your file allocation table keeps track of where the pieces are, however, it takes longer to
access a file that is in pieces (fragmented), than a file that IS all in one spot on the hard drive. This is where defragmenting comes in. When you
defragment your hard drive, this process copies all of the pieces to temporary spots on the hard drive, and then fills in all of the files (in their entirety) from
the inside, out, so that no files are split into pieces. This dramatically speeds up the seek time, as well as speeds up the use of your files and programs.
NOTE: to efficiently defragment a hard drive, it likes to have 25% free space. It can still do the defragmentation with only 15% free space, but it takes quite a
bit longer. If you can, delete any unnecessary files before deframenting your drives.

                                                                           
a. To defragment your hard drives (in any Windows operating system), double-click on My Computer. Right-click
on the c-drive and click on Properties. Click on the Tools tab and choose the bottom button, to Defragment Now… Click on the appropriate drive, and then
on Defragment. This can take some time. Depending on your processing power, the amount of RAM you have available, the size and speed of your drive,
and a few other things, this process can take 20 minutes, or hours. It is best to let this one run over night, as well, but it is well worth it.

Good luck. I hope this article has helped you. If you live in the Lapeer, Genesee, or Tuscola County, Michigan areas, and would like an IT Professional to do
a professional TuneUp on your computer(s) in your home or business, please contact Lapeer Tech Group at (810) 793-1093, or visit our website at
www.
LapeerTechGroup.com. You can email us at info@LapeerTechGroup.com.




About the Author:

Jim Shutes

I have worked in the IT field since 1989 and hold several Microsoft certifications. I am a network administrator and owner and operator of Lapeer Tech
Group located in Columbiaville Michigan (just outside of Lapeer). During these years I have supported both Macs and PCs am an accomplished graphic
and web designer and have had the opportunity to support 2nd and 3rd level enterprise networks for GM EDS Delphi and Delco.

Source:
ArticleWorld.net

Registry Cleaner

When a software is removed,   
fragments of the registry are left
behind. These fragments remain in
the loading lists and have potential
to slowdown system performance.
Using a registry cleaner is one of the
only ways to get rid of these bits. The
registry cleaner scans the registry,
and picks out the unnecessary
and/or damaged pieces and
deletes/repairs them.

A registry cleaner is a type of
program for Microsoft Windows
Operating System designed to
remove redundant or unwanted
items from the Windows registry.
The cleaner program attempts to
remove unneeded or unwanted
items from the registry.

Registry cleaners, or registry
cleanup software, can often improve
the performance and reliability of
computers by ridding the registry of
unnecessary and fragmented files,
which can dramatically reduce the
need for serious maintenance.

Source:
Wikipedia
Download a free registry cleaner from
pcworld
HERE!!
_____________________________________________________________________________
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
...............................................................................................................................................................................................................................